下載老師傳的3DEXPLOR181.EXE檔案
-------------------------------------------------------------------------------------------------------------
點開下載檔案內的3D EXploration檔案
-------------------------------------------------------------------------------------------------------------
程式打開後把老師的鋼彈模型點開
-------------------------------------------------------------------------------------------------------------
打開後將檔案存成OpenGL.cpp檔案 SampleAPP格式
-------------------------------------------------------------------------------------------------------------
打開codeblocks新增OpenGL project檔
將maic.cpp檔刪除將入剛彈檔案
-------------------------------------------------------------------------------------------------------------
加入老師傳的文字檔中的兩串文字
-------------------------------------------------------------------------------------------------------------
#define GL_BGR_EXT 0x80E0
#define GL_BGRA_EXT 0x80E1
將程式中的兩串文字註解掉
-------------------------------------------------------------------------------------------------------------
將剛彈圖檔放進檔案中
開啟後會出現旋轉跳動的彩色鋼彈
-------------------------------------------------------------------------------------------------------------
畫出茶壺然後打光
#include<GL/glut.h>
#include<stdio.h>
void display()
{
glClear( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glutSolidTeapot(0.3);
glutSwapBuffers();
}
const GLfloat light_ambient[] = { 0.0f, 0.0f, 0.0f, 1.0f };
const GLfloat light_diffuse[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_position[] = { 2.0f, 5.0f, -5.0f, 0.0f };
const GLfloat mat_ambient[] = { 0.7f, 0.7f, 0.7f, 1.0f };
const GLfloat mat_diffuse[] = { 0.8f, 0.8f, 0.8f, 1.0f };
const GLfloat mat_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat high_shininess[] = { 100.0f };
int main( int argc, char** argv)
{
glutInit( &argc, argv);
glutInitDisplayMode( GLUT_DOUBLE | GLUT_DEPTH );
glutCreateWindow("Week12 all in ");
glutDisplayFunc(display);
glEnable(GL_DEPTH_TEST);
glDepthFunc(GL_LESS);
glEnable(GL_LIGHT0);
glEnable(GL_NORMALIZE);
glEnable(GL_COLOR_MATERIAL);
glEnable(GL_LIGHTING);
glLightfv(GL_LIGHT0, GL_AMBIENT, light_ambient);
glLightfv(GL_LIGHT0, GL_DIFFUSE, light_diffuse);
glLightfv(GL_LIGHT0, GL_SPECULAR, light_specular);
glLightfv(GL_LIGHT0, GL_POSITION, light_position);
glMaterialfv(GL_FRONT, GL_AMBIENT, mat_ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, mat_diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular);
glMaterialfv(GL_FRONT, GL_SHININESS, high_shininess);
glutMainLoop();
}
------------------------------------------------------------------------------------------------------------
下載老OpenCV2.1檔案
在codeblocks的setting中的compiler
Search directories的Compiler中輸入C:\OpenCV2.1\include
Search directorise的Linker中輸入C:\OpenCV2.1\lib
Linker settings的Link libraries中輸入cv210 cxcore210 highgui210
------------------------------------------------------------------------------------------------------------
改變專案執行目錄
用nope++打開cpb檔
並將工作位置更改
----------------------------------------------------------------------------------------------------------
將老師傳的程式碼丟進程式裡面
#include <opencv/highgui.h> ///使用 OpenCV 2.1 比較簡單, 只要用 High GUI 即可
#include <opencv/cv.h>
#include <GL/glut.h>
int myTexture(char * filename)
{
IplImage * img = cvLoadImage(filename); ///OpenCV讀圖
cvCvtColor(img,img, CV_BGR2RGB); ///OpenCV轉色彩 (需要cv.h)
glEnable(GL_TEXTURE_2D); ///1. 開啟貼圖功能
GLuint id; ///準備一個 unsigned int 整數, 叫 貼圖ID
glGenTextures(1, &id); /// 產生Generate 貼圖ID
glBindTexture(GL_TEXTURE_2D, id); ///綁定bind 貼圖ID
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖T, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖S, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); /// 貼圖參數, 放大時的內插, 用最近點
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); /// 貼圖參數, 縮小時的內插, 用最近點
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img->width, img->height, 0, GL_RGB, GL_UNSIGNED_BYTE, img->imageData);
return id;
}
---------------------------------------------------------------------------------------------------------------
加入一串程式碼myTexture("Diffuse.jpg"); 在glutMainLoop();上面
--------------------------------------------------------------------------------------------------------------
將圖片移進檔案裡
---------------------------------------------------------------------------------------------------------------
全部程式碼
#include<GL/glut.h>
#include<stdio.h>
#include <opencv/highgui.h> ///使用 OpenCV 2.1 比較簡單, 只要用 High GUI 即可
#include <opencv/cv.h>
#include <GL/glut.h>
int myTexture(char * filename)
{
IplImage * img = cvLoadImage(filename); ///OpenCV讀圖
cvCvtColor(img,img, CV_BGR2RGB); ///OpenCV轉色彩 (需要cv.h)
glEnable(GL_TEXTURE_2D); ///1. 開啟貼圖功能
GLuint id; ///準備一個 unsigned int 整數, 叫 貼圖ID
glGenTextures(1, &id); /// 產生Generate 貼圖ID
glBindTexture(GL_TEXTURE_2D, id); ///綁定bind 貼圖ID
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖T, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖S, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); /// 貼圖參數, 放大時的內插, 用最近點
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); /// 貼圖參數, 縮小時的內插, 用最近點
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img->width, img->height, 0, GL_RGB, GL_UNSIGNED_BYTE, img->imageData);
return id;
}
void display()
{
glClear( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glutSolidTeapot(0.3);
glutSwapBuffers();
}
const GLfloat light_ambient[] = { 0.0f, 0.0f, 0.0f, 1.0f };
const GLfloat light_diffuse[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_position[] = { 2.0f, 5.0f, -5.0f, 0.0f };
const GLfloat mat_ambient[] = { 0.7f, 0.7f, 0.7f, 1.0f };
const GLfloat mat_diffuse[] = { 0.8f, 0.8f, 0.8f, 1.0f };
const GLfloat mat_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat high_shininess[] = { 100.0f };
int main( int argc, char** argv)
{
glutInit( &argc, argv);
glutInitDisplayMode( GLUT_DOUBLE | GLUT_DEPTH );
glutCreateWindow("Week12 all in ");
glutDisplayFunc(display);
glEnable(GL_DEPTH_TEST);
glDepthFunc(GL_LESS);
glEnable(GL_LIGHT0);
glEnable(GL_NORMALIZE);
glEnable(GL_COLOR_MATERIAL);
glEnable(GL_LIGHTING);
glLightfv(GL_LIGHT0, GL_AMBIENT, light_ambient);
glLightfv(GL_LIGHT0, GL_DIFFUSE, light_diffuse);
glLightfv(GL_LIGHT0, GL_SPECULAR, light_specular);
glLightfv(GL_LIGHT0, GL_POSITION, light_position);
glMaterialfv(GL_FRONT, GL_AMBIENT, mat_ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, mat_diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular);
glMaterialfv(GL_FRONT, GL_SHININESS, high_shininess);
myTexture("Diffuse.jpg");
glutMainLoop();
}
-------------------------------------------------------------------------------------------------------------
程式執行
沒有留言:
張貼留言